Evaluation of the antibacterial activities of face masks coated with titanium dioxide nanoparticles

Scientific Reports volume 12, Article number: 18739 (2022) Cite this article

1521 Accesses

2 Citations

184 Altmetric

Metrics details

To control infectious diseases, various applications of nanotechnology have been used to enhance the self-cleaning and antibacterial properties of materials. This study aimed to evaluate the antibacterial properties of face masks coated with TiO2 nanoparticles. The antibacterial efficacies of cloth face masks coated with TiO2 were measured by inoculating them in bacterial suspensions (105 CFUs from both E. coli and S. aureus). The results showed that TiO2 nanoparticle solutions (at 2%) reduced the starting inoculum of 105 CFUs (5 log cfu/cm2) of E. coli and S. aureus to 1.3 and 1.68 log, respectively, with antibacterial activities of 3.7 and 3.34 log, respectively. Furthermore, at a 1% concentration, the antibacterial activities against E. coli and S. aureus were 2.1 and 2.01 log, respectively, while at a low concentration (0.5%), the antibacterial activities against E. coli and S. aureus were 1.8 and 1.72 log, respectively. The CFUs in all the experimental groups were significantly lower than those in the control group (saline). In conclusion, TiO2 nanoparticle solutions with a high concentration (2%) demonstrated a strong antibacterial effect on E. coli and S. aureus, and the difference was statistically significant, while a significant antibacterial activity was demonstrated with lower concentration (0.5% and 1%) nanoparticle solutions of TiO2 after 18 h. There was a statistically significant difference regarding colony reduction between E. coli and S. aureus even at 3 h. The antibacterial activities of TiO2 in face masks could be promising for reducing the risk of bacterial infections.

The development of nanotechnology is a promising technological trend that may have a large impact in many fields, such as physics and biology, medicine, electronics, food, water quality, the textile industry, air quality and biomechanics 1. It is defined as "a science and technology which is conducted at one billionth (10−9) part of metre," i.e., on the nanoscale (1–100 nm).

There are many types of nanoparticles, such as metallic, nonmetallic, organic, and inorganic nanoparticles 2. Titanium, copper, and silver nanoparticles are examples of metallic nanoparticles. Titanium dioxide (TiO2) has unique properties, such as a low cost, stability, low toxicity, high refractive index, high optical properties, high ultraviolet absorbance, strong redox ability, high energy gap (i.e., 3.2–5.2 eV), and has good electrical, optical and magnetic properties 3,4. It is necessary to fully define the characteristics of nanoparticles, such as their size, shape, surface morphology, crystallinity, and light absorption, using appropriate characterization techniques 5, such as microscopy techniques (electron microscopy or scanning probe microscopy). Additionally, optical techniques (spectroscopy) can be used to study nanoparticle characteristics, such as reflectance, transmittance, photochemistry, and luminescence 6. Brunauer–Emmett–Teller (BET), X-ray diffractometry (XRD), and infrared spectroscopy (IR) are the most extensively used techniques for the characterization of NP structures and may be used to describe the phase, particle size, type, and crystal nature of nanoparticles. The surface quality of nanoparticles is highly influenced by their mechanical properties, which include stress, surface coatings, hardness, strain, friction, and adhesiveness. The characteristics of TiO2 include stability, low cost, nontoxicity, biocompatibility, optical, and electrical properties. It mostly appears in three distinct forms, including brookite, anatase, and rutile, with different structures. Thermodynamic simulations show that during heating, both anatase and brookite transform into rutile, which is more stable at all temperatures and pressures below 60 kbar 7. Nanomaterials, such as TiO2 photocatalysts, have demonstrated remarkable activity in the photodegradation of a variety of organic and inorganic pollutants. Since organic contaminants may totally degrade into harmless materials under normal circumstances of temperature and pressure, it is expected that photocatalysis will soon be one of the most efficient methods for dealing with diverse types of contaminants. Pollutants, including herbicides, carboxylic acids, and alcohols, can be entirely broken down into carbon dioxide, water, and simple minerals 8. The photocatalyst has to have specific qualities, such as the right particle size, shape, crystallinity, and anatase to rutile ratio, to be particularly effective. The most commonly used methods for producing TiO2 nanoparticles are electrodeposition, reverse micelles, the sol–gel method, metal organic chemical vapour deposition, the flame combustion method, gas phase (aerosol) synthesis, hydrothermal methods, wet-chemical synthesis by the precipitation of hydroxides from salts, and microemulsion-mediated methods 9. The sol–gel process is a wet-chemical technique that is mostly used in the fields of materials science and ceramic engineering. It can be defined as the conversion of a precursor solution into an inorganic solid through polymerization reactions induced by water 10. Hydrolysis forms a sol that is basically a dispersion of colloidal particles in a liquid, and condensation leads to the formation of a gel. Compared to the methods discussed above, the sol–gel process is very promising for the synthesis and preparation of inorganic and organic‒inorganic hybrid nanomaterials because it allows the use of low processing temperatures (< 100 °C) and molecular level composition homogeneity 10. Particle size and shape are easy to control using the sol–gel method. The sol–gel process produces fine, spherical powders of uniform size and has been widely used to synthesize TiO2 materials and normally proceeds via an acid-catalysed step of titanium (IV) alkoxides 11. One of the most attractive features of the sol–gel process is the possibility of shaping the resulting material into desired forms, such as fibre, film and monodispersed powder. Several steps and conditions are applied in a sol–gel process to control the final morphology, as suggested by Mehrotra and Singh 10. The use of TiO2 as a photocatalyst to kill microorganisms has been known for a long time 12. The antibacterial properties and mechanisms of nanotechnology have been widely discussed, including those of nanoparticles of TiO2, which have been extensively applied due to their photocatalytic properties to breakdown and remove dirt, odour, and kill bacteria. The mechanism of this technique depends on the generation of reactive superoxide radicals (O2− and ·OH) on the surface of TiO2 molecules during the process of photocatalysis when exposed to light of an appropriate wavelength 13,14,15. Oxygen radicles affect bacterial cells by different mechanisms, leading to their death. Both types of bacteria differ from each other in their response to antibacterial nanoparticles. Disinfection is defined as the treatment procedure used to eliminate pathogenic microorganisms, but it may not eliminate bacterial spores 16. During recent decades, TiO2 in the form of nanoparticles has been known to have broad-spectrum antibacterial activities 17,18. Fabric face masks are materials that are used to protect against breathable pathogens (bacterial or viral) 19. They are classified as full masks, half masks, and quarter masks. The filtering efficiency of face masks varies from one to another depending on the density of the face mask material 20. With the continuous use of face masks without regular exchange, improper washing can potentially contaminate surfaces, as temperature and humidity induce moisture and hence microbial colonization; in addition, improper use may lead to the risk of pathogen spreading 21,22,23,24,25. The disposal of face masks has led to an enormous increase in waste, which is classified as "hazardous with infectious risk", and face masks are disposed of as biological hazards 26. Nanoparticles have been shown to be capable of killing a wide range of organisms, including gram-negative and gram-positive bacteria, which differ in regard to their cellular wall and envelope and hence their resistance to disinfectants 27. In addition, many other organisms, including viruses, fungi, algae and protozoa, have been shown to be killed by TiO2 nanoparticles 12. It has been shown that these nanoparticles are useful for the disinfection of face masks 16,17. Face masks coated with TiO2 are widely applied for enhanced self-cleaning and antibacterial properties to control infectious diseases, such as COVID-19 28. This paper aimed to evaluate the antibacterial properties of face masks coated with TiO2 nanoparticles.

TiO2 nanoparticle solution was prepared by the hydrolysis and condensation of 97% titanium tetraisopropoxide in an acidic aqueous solution (low pH) of glacial acetic acid and 37% HCL acid with different concentrations of TiO2 precursor. The mixture was heated at 60 °C under vigorous stirring for 90 min. TiO2 nanoparticle powder was used to impart self-cleaning and antibacterial properties.

Five pieces of fabric face mask were selected for this study, each composed of 80% polyamide and 20% elastane. The antibacterial activities of these face masks were evaluated with suspension tests according to the standard ISO 20743:2021 entitled "Textiles—determination of antibacterial activity of antibacterial finished products."

To test the biocidal activity, two types of bacteria were used, one gram-positive bacteria and one gram-negative bacteria.

All masks were coated with a suspension of TiO2 nanoparticles at different concentrations of 0.5, 1 and 2% w/w, dried for approximately 24 h and cut into pieces of approximately 2 × 2 cm. Two bacterial suspensions of E. coli (ATCC 25922) and S. aureus (ATCC 25923) were cultured on tryptic soy agar (Oxoid, UK) and incubated at 35 °C overnight. Each coated mask piece was inoculated with a suspension of McFarland standard (1.0 × 105) colony forming units (CFUs/ml) of E. coli and S. aureus at time 0 (T0). The swabbing (2 × 2 cm) of each mask piece was performed at 7 equal intervals for analysis at 0, 3, 6, 9, 12, and 15 and at 18 h. To determine the colony count of each piece, the swabs were diluted in one millilitre of sterile nutrient broth in tubes. The whole suspension of each of these tubes was drawn and spread over nutrient agar to determine the colony count with a digital colony counter. The mean value of CFUs and the antibacterial activities were obtained every three hours (at 0, 3, 6, 9, 12, 15, and 18 h), and the number of CFUs was reported as CFU/cm2. The colony plate count method was used for the enumeration of bacterial CFUs after overnight incubation at 37 °C. All tests were run in triplicate. Another five pieces were kept as controls by using saline solution (0.85% NaCl) instead of TiO2 nanoparticles. The antibacterial activities were calculated according to the formula below 29, while the assessment was performed according to ISO 20743-2021 (Table 1).

One-way analysis of variance (ANOVA) was used to check the mean differences among the antibacterial activities at different time intervals within groups and at different concentrations of TiO2 (P < 0.05). The paired t test was used to check the mean differences among the antibacterial activities (reduction) at different time intervals within groups (P < 0.05). Statistical analyses were performed using SPSS-25 (Inc., IBM, Chicago, IL, USA).

The present study evaluated the antibacterial activities of mask samples using TiO2 nanoparticles as antibacterial agents against E. coli and S. aureus. Table 2 shows the bacterial count log (log cfu/cm2) at different TiO2 concentrations. When TiO2 nanoparticle solutions of a high concentration (2%) were used, the starting inoculum of 5 log (105 cfu/ml) bacteria was reduced to 1.3 and 1.68 log for E. coli and S. aureus, respectively. When TiO2 nanoparticle solutions of a low concentration (0.5%) were used, the starting inoculum of 5 log bacteria was reduced to 3.2 and 3.3 log for E. coli and S. aureus, respectively. When TiO2 nanoparticle solutions were used at a concentration of 1%, the starting inoculum of 5 log bacteria was reduced to 2.9 and 3.01 log E. coli and S. aureus, respectively. Table 3 shows the bacterial count (log cfu/cm2) of the negative control after exposure to normal saline instead of TiO2 solution. It is noted that the starting inoculum of 5 log of both E. coli and S. aureus remained unchanged or slightly increased.

Table 4, Figs. 1 and 2 show the significant antibacterial efficacy of the TiO2 nanoparticles applied to face masks against E. coli and S. aureus depending on the concentration. When TiO2 nanoparticle solutions of a high concentration (2%) were applied to face masks against E. coli and S. aureus, efficacies of 3.7 and 3.34 log reduction were obtained, respectively, which is considered strong antibacterial activity (Table 1). Furthermore, at a 1% concentration, the efficacy against E. coli and S. aureus was 2.1 and 2.01 log reduction, respectively, which is considered a significant antibacterial activity (Table 1), while at a low concentration (0.5%), the efficacy against E. coli and S. aureus was 1.8 and 1.72 log reduction, respectively, which is also considered a significant antibacterial activity (Table 1).

Antibacterial activity of TiO2 nanoparticles against E. coli.

Antibacterial activity of TiO2 nanoparticles against S. aureus.

The CFUs of all the experimental groups were significantly lower in comparison with those of the control group (Saline). TiO2 nanoparticle solutions of a high concentration demonstrated better antimicrobial efficacy. There was a significant difference among the antibacterial activities at different time intervals (P = 0.00), while there was no significant difference among the antibacterial activities at TiO2 concentrations within the groups (P = 0.184). There was a significant difference in the data between E. coli and S. aureus (P < 0.05).

This study reports the antibacterial effect of TiO2 nanoparticle materials against bacterial strains in face masks contaminated with E. coli and S. aureus after exposure to different concentrations. TiO2 nanoparticles were chosen because they act as a photocatalyst to kill microorganisms. In addition, TiO2 has a low cost, stability, low toxicity, high ultraviolet absorbance, and a high energy gap (i.e., 3.2–5.2 eV) 3,4.

This study reports the antibacterial effect of TiO2 nanoparticle materials against bacterial strains in face masks contaminated with E. coli and S. aureus after exposure to different concentrations. Results were collected for TiO2 nanoparticle solutions of different concentrations (0.5–2%). A higher concentration reduced the starting inoculum from 5 to 1.3 and 1.68 log for E. coli and S. aureus, respectively, while a lower concentration (0.5%) reduced the starting inoculum from 5 to 3.2 and 3.3 log for E. coli and S. aureus, respectively. When TiO2 nanoparticle solutions were used at a concentration of 1%, the starting inoculum was reduced from 5 to 2.9 and 3.01 log E. coli and S. aureus, respectively. The CFUs in all the experimental groups were significantly lower in comparison with the control group (Saline). TiO2 nanoparticles have been tested for their antibacterial efficacy in different matrices, such as in fabrics of various materials 32.

Gram-positive bacteria (S. aureus) have one membrane surrounded by a very thick wall made of peptidoglycan. Gram-negative bacteria (Escherichia coli (E. coli)) have a very thin membrane, which constitutes a barrier that retains the toxic agent, while the wall has been reported to be sensitive to the peroxidation caused by TiO233.

A great majority of studies have been performed with gram-negative and gram-positive bacteria 12. TiO2 nanoparticle-treated materials have been shown to be effective against bacteria and have been reported to have excellent disinfectant properties against other types of microbial contamination 34. The disinfectant property of TiO2 nanoparticles is greatly dependent on the photocatalytic behaviour of TiO2 35,36.

Sunada et al. 37 suggested that the cell wall of E. coli cells acts as a barrier to the mechanism process because the outer membrane serves as a barrier, and the outer membrane decomposes first before the complete decomposition of entire cells. The photocatalytic oxidation mechanism of TiO2 nanoparticles was studied by Nadtochenko et al. 38, who demonstrated that the organic material content is oxidized due to photocatalytic activity, which leads to TiO2 surface cleaning, and consequently, the organic material of the cell wall membrane reduces holes in the TiO2 valence band. Our results showed a significant antibacterial efficacy (log reduction) of the TiO2 nanoparticles in the face masks depending on the concentration. When TiO2 nanoparticle solutions of a high concentration (2%) were applied to face masks against E. coli and S. aureus, efficacies of 3.7 and 3.34 log reduction were obtained, respectively, which is considered strong antibacterial activity (Table 1). Furthermore, at a 1% concentration, the efficacy against E. coli and S. aureus was 2.1 and 2.01 log reduction, respectively, which is considered a significant antibacterial activity (Table 1), while at a low concentration (0.5%), the efficacy against E. coli and S. aureus was 1.8 and 1.72 log reduction, respectively, which is also considered a significant antibacterial activity (Table 1). TiO2 nanoparticle solutions of a high concentration demonstrated better antimicrobial efficacy (P < 0.05). There was a significant difference among the antibacterial activities at different time intervals within the groups. There was also a significant difference in the data collected for E. coli and S. aureus (P < 0.05).

Our results are similar to earlier findings by some authors 39,40 who showed a reduction in bacterial count after contact with TiO2 nanoparticles.

Another finding showed significant antibacterial activities after two and four hours, suggesting that the formulation improved and increased efficiency 41. Initially, the colony count fell rapidly with increasing concentrations of TiO2, but with 2% TiO2, the colony count was reduced more effectively. It was reported that the bactericidal effect induced by TiO2 nanoparticles depends on the time, concentration and light intensity 40,42,43,44. The different antibacterial activities of TiO2 nanoparticles on E. coli and S. aureus are probably due to the differences in the bacterial cell wall structures. S. aureus has only a plasma membrane and possesses a thick peptidoglycan layer, while E. coli has a thin cell wall composed of two cell membranes 45. Our result is similar to other findings conducted by different researchers who reported the antibacterial activities of other nanomaterials 46,47. In a similar study on facemasks, a 100% reduction in E. coli and S. aureus with minimum inhibitory concentrations of 1/128 and 1/512, respectively, was reported 48. Gogniat et al. 49 found that the rate of cell killing was positively correlated with the bactericidal effect of TiO2 and the aggregation of TiO2, which led to membrane integrity. Various studies report different TiO2 concentrations and antibacterial activities 50. The inactivation process of bacteria increased as the exposure time increased, and sterilization efficiency increased. This also is in agreement with other reports that deal with the effect of TiO2 on bacterial cells 37,51. Caballero et al., studied the inactivation of E. coli and found that the inactivation rate of E. coli increased with decreasing TiO2 concentration. They also showed that increasing particle contact with the bacteria enhanced the disinfection process and that excess TiO2 might not enhance the antibacterial effect 51. In a similar study, Margarucci et al. 21 reported a significant reduction in the microbial load (over 90%) in facemasks using both E. coli and S. aureus bacteria within less than 1 h.

The present study was undertaken in Makkah city, Saudi Arabia, which is considered the location of one of the world's largest annual mass gatherings; hence, respiratory diseases are a major concern.

Public health organizations advise those on pilgrimages to use face masks since they are known to stop the transmission of respiratory illnesses from one person to another. Bacterial growth may result from the repeated usage of facemasks, breathing, and saliva aerosols. In addition, the disposal of face masks might result in a significant rise in waste that is considered a "hazardous contagious risk" because of the crowds and mass gatherings. Reusable face masks with antimicrobial effects would therefore be quite helpful. This study's findings will further reveal how respiratory diseases can be controlled during mass gatherings. These findings are of major importance to assessing how TiO2 nanoparticles can be a major antimicrobial agent, especially when exposed to visible light, whereby they absorb light and act as photocatalysts that successfully kill S. aureus and E. coli. The antibacterial activities of face masks coated with titanium dioxide nanoparticles would lead to environmental sustainability in different occupational or recreational settings.

In conclusion, the CFUs in all the experimental groups were significantly lower than those in the control group (saline). TiO2 nanoparticle solutions of a high concentration demonstrated better antimicrobial efficacy, and the difference was statistically significant. Strong antibacterial activity was demonstrated against E. coli and S. aureus by face masks coated with nanoparticle solutions of a high concentration (2%), while significant antibacterial activity was demonstrated using both 0.5% and 1% TiO2 nanoparticle solutions after 18 h. There was a statistically significant difference regarding colony reduction between E. coli and S. aureus even at 3 h. The antibacterial activities of TiO2 in face masks could be promising in reducing the risk of bacterial infections.

All data generated or analysed during this study are included in this published article [and its supplementary information files].

Bayda, S. et al. The history of nanoscience and nanotechnology: From chemical-physical applications to nanomedicine. Molecules 25, 112 (2020).

Article ADS CAS Google Scholar

Guerrero, C. M. et al. Antimicrobial metal-based nanoparticles: A review on their synthesis, types and antimicrobial action. Beilstein J. Nanotechnol. 25, 1450–1469 (2020).

Article Google Scholar

Abdul-Jalill, R. D. Green synthesis of titanium dioxide nanoparticles with volatile oil of Eugenia caryophyllata for enhanced antimicrobial activities. IET Nanobiotechnol. 12, 678–687 (2018).

Article PubMed PubMed Central Google Scholar

Bhakat, C. Uniform TiO2 nanoparticles synthesis and characterization by hemolysis process. Int. J. Eng. Sci. Technol. 4, 3081–3085 (2012).

Google Scholar

- Nkele, A.C. & Ezema, F. I. Diverse synthesis and characterization techniques of nanoparticles. In (ed Ares, A. E.) Thin Films [Internet]. (IntechOpen, London, 2020). https://www.intechopen.com/chapters/73951.

Khan, I., Saeed, K. & Khan, I. Nanoparticles: Properties, applications and toxicities. Arab. J. Chem. 12, 908–931 (2019).

Article CAS Google Scholar

Thanh, N. T., Maclean, N. & Mahiddine, S. Mechanisms of nucleation and growth of nanoparticles in solution. Chem. Rev. 114, 7610–7630 (2014).

Article CAS PubMed Google Scholar

Mourdikoudis, S., Pallares, R. M. & Thanh, N. T. K. Characterization techniques for nanoparticles: Comparison and complementarity upon studying nanoparticle properties. Nanoscale 10, 12871–12934 (2018).

Article CAS PubMed Google Scholar

Biswas, A. et al. Control of the size and shape of TiO2 nanoparticles in restricted media. Nanotechnology 24, 195601 (2013).

Article ADS PubMed Google Scholar

- Nyamukamba, P. et al. Synthetic methods for titanium dioxide nanoparticles: A review. In (ed. Yang, D.) Titanium Dioxideṣ—Material for a Sustainable Environment [Internet]. (IntechOpen, London, 2018). https://www.intechopen.com/chapters/60518.

Oskam, G. et al. The growth kinetics of TiO2 nanoparticles from titanium (IV) alkoxide at high water/titanium ratio. J. Phys. Chem. B 107, 1734 (2003).

Article CAS Google Scholar

Foster, H. A. et al. Photocatalytic disinfection using titanium dioxide: Spectrum and mechanism of antimicrobial activity. Appl. Microbiol. Biotechnol. 90, 1847–1868 (2011).

Article CAS PubMed PubMed Central Google Scholar

Green, J., Carter, E. & Murphy, D. An EPR investigation of acetonitrile reactivity with superoxide radicals on polycrystalline TiO2. Res. Chem. Intermed. 35, 145–154 (2009).

Article CAS Google Scholar

Carter, E., Carley, A. & Murphy, D. Evidence for O2—radical stabilization at surface oxygen vacancies on polycrystalline TiO2. J. Phys. Chem. C 111, 10630–10638 (2007).

Article CAS Google Scholar

Chen, X. & Mao, S. S. Titanium dioxide nanomaterials: Synthesis, properties, modifications, and applications. Chem. Rev. 107, 2891–2899 (2007).

Article CAS PubMed Google Scholar

Madigan, M. T. et al. Brock Biology of Microorganisms 10th edn, 696–707 (Pearson Education Publishers, 2002).

Google Scholar

Aldez-Salas, B. et al. Promotion of surgical masks antimicrobial activity by disinfection and impregnation with disinfectant silver nanoparticles. Int. J. Nanomed. 16, 2689–2702 (2021).

Article Google Scholar

He, Z. et al. Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods. J. Environ. Sci. 25, 2460–2468 (2013).

Article CAS Google Scholar

Lipp, A. & Edwards, P. Disposable surgical face masks: A systematic review. Can. Oper. Room Nurs. J. 23, 20–38 (2005).

PubMed Google Scholar

Matuschek, C. et al. Face masks: Benefits and risks during the COVID-19 crisis. Eur J Med Res. 25, 32 (2020).

Article CAS PubMed PubMed Central Google Scholar

Margarucci, L. M. et al. Photocatalytic treatments for personal protective equipment: Experimental microbiological investigations and perspectives for the enhancement of antimicrobial activity by micrometric TiO2. Int. J. Environ. Res. Public Health. 18, 8662 (2021).

Article CAS PubMed PubMed Central Google Scholar

Li, Y. et al. Transmission of communicable respiratory infections and facemasks. J. Multidiscip. Healthc. 1, 17–27 (2008).

PubMed PubMed Central Google Scholar

Jones, R. M. & Rempel, D. Standards for surgical respirators and masks: Relevance for Protecting healthcare workers and the public during pandemics. Ann. Work. Expo. Health. 65, 495–504 (2021).

Article CAS PubMed Google Scholar

Bailar, J. C. et al. Reusability of Facemasks during an Influenza Pandemic 1–106 (The National Academies Press, 2006).

Google Scholar

Zambrano, M. C. et al. Microfibers generated from the laundering of cotton, rayon and polyester based fabrics and their aquatic biodegradation. Mar. Pollut. Bull. 142, 394–407 (2019).

Article CAS PubMed Google Scholar

Howard, M. C. Gender, face mask perceptions, and face mask wearing: Are men being dangerous during the COVID-19 pandemic?. Personal. Individ. Differ. 170, 110417 (2021).

Article Google Scholar

Paspaltsis, I. et al. Titanium dioxide photocatalytic inactivation of prions. J. Gen. Virol. 87, 3125–3130 (2006).

Article CAS PubMed Google Scholar

Tripathi, D. G. K. et al. Nanotechnology for mitigating impact of COVID-19. J. Appl. Sci. Eng. Technol. Educ. 3, 171–180 (2021).

Article Google Scholar

- Hoefer, D. & Hammer, T.R. Antimicrobial Active Clothes Display No Adverse Effects on the Ecological Balance of the Healthy Human Skin Microflora. International Scholarly Research Network (ISRN Dermatology). 2011, Article ID 369603, 8 pages (2011).

- ISO 20743:2021. Textiles—determination of antibacterial activity of textile products. (2021).

Höfer, D. Antimicrobial textiles—evaluation of their effectiveness and safety. Curr. Probl. Dermatol. 33, 42–50 (2006).

Article PubMed Google Scholar

Margarucci, L. M. et al. Potential antimicrobial effects of photocatalytic nanothecnologies in hospital settings. Ann. Ig. 31, 461–473 (2019).

CAS PubMed Google Scholar

Pulgarin, C., Kiwi, J. & Nadtochenko, V. Mechanism of photocatalytic bacterial inactivation on TiO2 films involving cell-wall damage and lysis. Appl. Catal. B 128, 179–183 (2012).

Article CAS Google Scholar

You, J. et al. A review of visible light-active photocatalysts for water disinfection: Features and prospects. Chem. Eng. J. 373, 624–641 (2019).

Article CAS Google Scholar

Punitha, V. N. et al. Protection of neuronal cell lines, antimicrobial and photocatalytic behaviours of eco-friendly TiO2 nanoparticles. J. Environ. Chem. Eng. 8, 104343 (2020).

Article MathSciNet Google Scholar

Gamage, J. & Zhang, Z. S. Applications of photocatalytic disinfection. Int. J. Photoenergy 4870, 11 (2010).

Google Scholar

Sunada, K., Watanabe, T. & Hashimoto, K. Studies on photokilling of bacteria on TiO2 thin film. J. Photochem. Photobiol. Chem. 156, 227–233 (2006).

Article Google Scholar

Nadtochenko, V. A. et al. Inactivation of pathogenic microorganisms in the photocatalytic process on nanosized TiO2 crystals. Russ. J. Phys. Chem. B Focus Phys. 2, 105–114 (2008).

Google Scholar

Carré, G. et al. TiO2 photocatalysis damages lipids and proteins in escherichia coli. Appl. Environ. Microbiol. 80, 2573–2581 (2014).

Article ADS PubMed PubMed Central Google Scholar

Horie, Y. et al. Effects of light intensity and titanium dioxide concentration on photocatalytic sterilization rates of microbial cells. Ind. Eng. Chem. Res. 35, 3920–3926 (1996).

Article CAS Google Scholar

Verdier, T. et al. Antibacterial activity of TiO2 photocatalyst alone or in coatings on E. coli: The influence of methodological aspects. Coatings 4, 670–686 (2014).

Article Google Scholar

Rincón, A. G. & Pulgarin, C. Photocatalytical inactivation of E. coli: Effect of (continuous–intermittent) light intensity and of (suspended–fixed) TiO2 concentration. Appl. Catal. B Environ. 44, 263–284 (2003).

Article Google Scholar

Benabbou, A. K. et al. Photocatalytic inactivation of Escherischia coli: Effect of concentration of TiO2 and microorganism, nature, and intensity of UV irradiation. Appl. Catal. B Environ. 76, 257–263 (2007).

Article CAS Google Scholar

Gumy, D. et al. Catalytic activity of commercial of TiO2 powders for the abatement of the bacteria (E. coli) under solar simulated light: Influence of the isoelectric point. Appl. Catal. B Environ. 63, 76–84 (2006).

Article CAS Google Scholar

Krishnamoorthy, M. et al. Antibacterial efficiency of graphene nanosheets against pathogenic bacteria via lipid peroxidation. J. Phys. Chem. C 116, 17280–17287 (2012).

Article CAS Google Scholar

Azam, A. et al. Antimicrobial activity of metal oxide nanoparticles against Gram-positive and Gram-negative bacteria: A comparative study. Int. J. Nanomed. 7, 6003–6009 (2012).

Article CAS Google Scholar

Yoon, K. Y. et al. Susceptibility constants of Escherichia coli and Bacillus subtilis to silver and copper nanoparticles. Sci. Total Environ. 373, 572–575 (2007).

Article ADS CAS PubMed Google Scholar

Li, Y. et al. Antimicrobial effect of surgical masks coated with nanoparticles. J. Hosp. Infect. 62, 58–63 (2006).

Article CAS PubMed Google Scholar

Gogniat, G. et al. The bactericidal effect of TiO2 photocatalysis involves adsorption onto catalyst and the loss of membrane integrity. FEMS Microbiol. Lett. 258, 18–24 (2006).

Article CAS PubMed Google Scholar

Article Google Scholar

Caballero, L. et al. Inactivation of Escherichia coli on immobilized TiO2 using fluorescent light. J. Photochem. Photobiol. Chem. 202, 92–98 (2009).

Article CAS Google Scholar

Download references

Department of Environmental and Health Research, The Custodian of the Two Holy Mosques Institute for Hajj and Umrah Research, Umm Al-Qura University, Makkah, Saudi Arabia

Omar B. Ahmed

Department of Mechanical Engineering, College of Engineering and Islamic Architecture, Umm Al-Qura University, Makkah, 24372, Saudi Arabia

Turki Alamro

You can also search for this author in PubMed Google Scholar

O.B.A. wrote the main manuscript text and T.A. prepared figures and tables. Both authors reviewed the manuscript.

Correspondence to Omar B. Ahmed.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Ahmed, O.B., Alamro, T. Evaluation of the antibacterial activities of face masks coated with titanium dioxide nanoparticles. Sci Rep 12, 18739 (2022). https://doi.org/10.1038/s41598-022-23615-w

Download citation

Received: 13 August 2022

Accepted: 02 November 2022

Published: 04 November 2022

DOI: https://doi.org/10.1038/s41598-022-23615-w

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.